REDZ Probe for Meters

Shop > Modbus Gateway and Auto Baud Change Tools > LKM755

LKM Series 868MHz LoRaWAN Meter Reader with Electricity Meter Protocol to Modbus Protocol Gateways can read IEC62056-21 Energy Meters and convert its data to Modbus Registers so that field devices or remote applications can meter data via Modbus TCP. Meter data will be sent to LoRaWAN Server through LoRaWAN Gateway in user defined periods. Meter data can also be sent to MQTT Server simultaneously. OBIS codes of read meters are fully definable by end user.
Typical applications: Automated Meter reading, Telemetry, Energy Management…

Brochure User Manual

frequently bought together

BKV312
USB 2.0 to 2 Port Ethernet Switch With USB Type A Cable

120.00 USD

Add to Cart

BKV322
USB 2.0 to 2 Port Ethernet Switch With USB Type C Cable

129.00 USD

Add to Cart

868MHz LoRaWAN Meter Reader with MODBUS TCP to IEC62056-21 Protocol Meter Gateway

LKM755

If you buy less than 5 items you will lose your 5% discount

399.00 USD 420.00 USD

per one optical probe

1995.00 USD 2100.00 USD

total price

[+] More Specifications

- Supports 2 x 10/100Base-T(X) ports + 1 x BPL link
- Wide Range 3 phase input, 110V–240V/50-60Hz wide range Power Input
- Supports up to 30Mbps PHY rate on BPL with Up to 10 hops and 1000 nodes
- Up to 432 sub-carriers from 2 to 28MHz analog bandwidth on BPL
- Support LDPC-C FEC with 128-bit AES core on BPL
- Supports Full/Half-Duplex, auto MDI/MDI-X on each port
- Supports 1 x RS232 and 1 x RS485 Serial Connection up to 115200 Baud
- Embedded web interface for ease of use
- Radio Band Options:
868MHz
EU 868 MHz – Europe, LoRaWAN RF Communication
- LoRaWAN data send interval configurable
- 2 different Gateway Operating Modes:
Serial IEC Meter to Modbus TCP Gateway with MQTT Publisher
TCP/IP IEC Meter to Modbus RTU Gateway with MQTT Publisher
- Up to 20 IEC Meter reading and conversion of their data to Modbus TCP or RTU conversion
- Reading up to 48 OBIS Registers and all user configurable from web interface
- MQTT Publisher with different data transfer options
OBIS Values as Data Objects
OBIS Values as Modbus Frame
- Built in LoRaWAN Duty Cycle Check
- Built in LoRaWAN payload size check. User can read data in any interval
LKM will automatically split based on Maximum Payload Size allowed and Duty Cycle Block Times
- Activation Over Air (OTAA) or Activation by Personalization (ABP) Selectable
- User defined LoRAWAN Port
- Adaptive Data Rate functionality
- Selectable Uplink Data Rate
- Selectable Power Level
- LoRaWAN Class C and Class A support
- Easy to follow Device Status on web interface
- Easy to follow LoRaWAN packages on web interface
- Easy to follow Meter Reading and Modbus Communication status from web interface
- Easy to follow OBIS to Modbus mapping status from web interface
- Easy to follow Meter Read Out Data from web interface
- White List or Black List based IP filter up to 20 IP Addresses
- Firmware Upgrade over Web
- 2 firmware storage capability on same device (1 active only)
- Wide operating temperature range from -40 to 85 °C
- Rugged Metal IP-40 housing design
- DIN-Rail mounting

Payment Options

Bank wire transfer option is available. Please contact us with your company commercial details for this method.
Drivers

My operation system is
Relase Date: 2017-08-30
X86 (32-BIT): 2.12.28
X64 (64-BIT): 2.12.28
Delivery

We ship worldwide via Express shipment. It takes maximum 2-3 days to deliver. It is always possible to use customer courier account and please contact us for that specific requirements.
Money back guarantee

We offer you money back guarantee if you do not satisfy with the quality and performance of our probes.